Configuring The Management Server During Installation; Accepting The Self-Signed Certificate For Symantec Endpoint Protection Manager - Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual

Configuring the management server during
installation
Accepting the self-signed certificate for Symantec
Endpoint Protection Manager
The Management Server Configuration Wizard automatically starts after the
Symantec Endpoint Protection Manager installation.
See Installing the management server and the console"
You can also start the Management Configuration Wizard at any time after
installation from Start > All Programs > Symantec Endpoint Protection Manager
> Symantec Endpoint Protection Manager Tools.
To configure the server, you specify the following information:
Whether you want to use a recovery file.
Note: If this is your first installation of Symantec Endpoint Protection Manager,
there is no recovery file.
See Performing disaster recovery"
The password for the default administrator account.
The email address that receives important notifications and reports.
The email server name and port number.
You can optionally add partner information if you have a Symantec Sales
Partner who manages your Symantec licenses.
See Planning the installation"
When you install Symantec Endpoint Protection Manager, a self-signed certificate
for the pages that are rendered in a browser is included as part of the installation.
When you first access these pages from a remote console, you must accept the
self-signed certificate for the pages to display.
The certificates are stored separately for each user. Each administrator account
must accept the certificate for each remote location from which they connect to
the management server.
See Logging on to the Symantec Endpoint Protection Manager console"
on page 49.
Installing Symantec Endpoint Protection Manager

Configuring the management server during installation

on page 311.
on page 35.
on page 45.
47