Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual page 223

Notifications The Log settings let you specify whether the server creates a log entry or
sends an email message when a traffic event matches the criteria that are
set for this rule.
Customizing firewall rules
1 In the console, open a Firewall policy.
2 On the Firewall Policy page, click Rules.
3 On the Rules tab, in the Rules list, in the Enabled field, ensure that the box
is checked to enable the rule; uncheck the box to disable the rule.
Symantec Endpoint Protection Small Business Edition only processes the
rules that you enable. All rules are enabled by default.
4
Double-click the Name field and type a unique name for the firewall rule.
5
Right-click the Action field and select the action that you want Symantec
Endpoint Protection Small Business Edition to take if the rule is triggered.
6 In the Application field, define an application.
See Defining information about applications"
7
In the Host field, specify a host trigger.
See Blocking traffic to or from a specific server"
8 In addition to specifying a host trigger, you can also specify the traffic that
is allowed to access your local subnet.
See Allowing only specific traffic to the local subnet"
9
In the Service field, specify a network service trigger.
See Controlling whether networked computers can share messages, files,
and printing" on page 225.
10 In the Log field, specify when you want Symantec Endpoint Protection Small
Business Edition to send an email message to you when this firewall rule is
violated.
See Setting up notifications for firewall rule violations"
11
If you are done with the configuration of the rule, click OK.
See Setting up firewall rules"
See About firewall rules"
on page 219.
on page 212.
Managing firewall protection
Setting up firewall rules
on page 215.
on page 224.
on page 225.
on page 228.
223