Managing Scans On Client Computers - Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual

136 Managing Virus and Spyware Protection

Managing scans on client computers

Managing scans on client computers
3 Click Back.
4 On the Logs tab, select the Computer Status log, and then click View Log.
5
If you changed an action and pushed out a new policy, select the computers
that need to be rescanned with the new settings.
6
From the Command list box, select Scan, and then click Start to rescan the
computers.
You can monitor the status of the Scan command from the Command Status
tab.
Some scans run by default, but you might want to change settings or set up your
own scheduled scans. You can also customize scans and change how much
protection they provide on your client computers.
Managing scans on client computers
Table 11-3
Task
Review the types of scans and default
settings
Description
Check your scan settings. You can review the
defaults and determine if you want to make
changes.
See About the types of scans and real-time
protection" on page 139.
See About the default Virus and Spyware
Protection policy scan settings" on page 153.