Copying And Pasting Firewall Rules; Customizing Firewall Rules - Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual

Copying and pasting firewall rules

Customizing firewall rules

10 When you are done, click Finish.
11 Optionally, you can customize the firewall rule criteria as needed.
12
If you are done with the configuration of the rule, click OK.
See Customizing firewall rules"
See Setting up firewall rules"
See Editing a policy"
See How the firewall uses stateful inspection"
Save time creating a new firewall rule by copying an existing rule that is similar
to the new rule that you want to create. Then you can modify the copied rule as
needed.
You can copy and paste rules from the same policy or another policy.
To copy and paste firewall rules
1 In the console, open a Firewall policy.
2 In the Firewall Policy page, click Rules.
3
On the Rules tab, right-click the rule you want to copy, and then click Copy
Rule.
4 Right-click the row where you want the rule to be pasted, and then click Paste
Rule.
5 Click OK.
See Customizing firewall rules"
See Setting up firewall rules"
See Editing a policy"
When you create a new Firewall policy, the policy includes several default rules.
You can modify one or multiple rule components as needed.
The components of a firewall rule are as follows:
on page 221.
on page 219.
on page 122.
on page 221.
on page 219.
on page 122.
Managing firewall protection
Setting up firewall rules
on page 214.
221