Setting A Password For A Router And Cache Engines Example; Verifying Wccp Settings Example - Cisco 7609 Configuration Manual

WCCP Configuration Examples
The following example configures a router to redirect web-related packets received through interface
ethernet 0/1, destined to any host except 209.165.196.51:
Router(config)# access-list 100 deny ip any host 209.165.196.51
Router(config)# access-list 100 permit ip any any
Router(config)# ip wccp web-cache redirect-list 100
Router(config)# interface Ethernet 0/1
Router(config-if)# ip wccp web-cache redirect in

Setting a Password for a Router and Cache Engines Example

The following example shows a WCCPv2 password configuration session where the password is
alaska1:
router# configure terminal
router(config)# ip wccp web-cache password alaska1

Verifying WCCP Settings Example

To verify your configuration changes, use the more system:running-config EXEC command. The
following example shows that the both the web cache service and dynamic service 99 are enabled on the
router:
router# more system:running-config
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
35-14
Building configuration...
Current configuration:
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname router4
!
enable secret 5 $1$nSVy$faliJsVQXVPW.KuCxZNTh1
enable password alabama1
!
ip subnet-zero
ip wccp web-cache
ip wccp 99
ip domain-name cisco.com
ip name-server 10.1.1.1
ip name-server 10.1.1.2
ip name-server 10.1.1.3
!
!
!
interface Ethernet0
ip address 10.3.1.2 255.255.255.0
no ip directed-broadcast
ip wccp web-cache redirect out
ip wccp 99 redirect out
no ip route-cache
no ip mroute-cache
!
Chapter 35 Configuring Web Cache Services Using WCCP
78-14064-04