Cisco 7609 Configuration Manual page 71

Chapter 4 Configuring EHSA Supervisor Engine Redundancy
Supervisor Engine Redundant Operation
Use the following command to copy a file to the bootflash: device on a redundant supervisor engine:
Router# copy source_device:source_filename slavesup-bootflash:target_filename
Use the following command to copy a file to the bootflash: device on a redundant MSFC:
Router# copy source_device:source_filename slavebootflash:target_filename
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
4-5
78-14064-04