Cisco 7609 Configuration Manual page 21

Preface
This preface describes who should read the Cisco 7600 Series Router Cisco IOS Software Configuration
Guide, how it is organized, and its document conventions.
Audience
This guide is for experienced network administrators who are responsible for configuring and
maintaining Cisco 7600 series routers.
Organization
This guide is organized as follows:
Chapter
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
78-14064-04
Title
Product Overview
Command-Line Interfaces
Configuring the Cisco 7600 Series
Router for the First Time
Configuring EHSA Supervisor
Engine Redundancy
Configuring RPR and RPR+
Supervisor Engine Redundancy
Configuring Interfaces
Configuring LAN Ports for Layer
2 Switching
Configuring VTP
Configuring VLANs
Configuring Private VLANs
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
Description
Presents an overview of the Cisco 7600 series
routers.
Describes how to use the command-line interface
(CLI).
Describes how to perform a baseline configuration.
Describes how to configure EHSA supervisor engine
redundancy.
Describes how to configure RPR and RPR+
supervisor engine redundancy.
Describes how to configure non-layer-specific
features on LAN interfaces.
Describes how to configure LAN interfaces to
support Layer 2 features, including VLAN trunks.
Describes how to configure the VLAN Trunking
Protocol (VTP).
Describes how to configure VLANs.
Describes how to configure private VLANs.
xxi