Cisco 7609 Configuration Manual page 466

Configuring PFC QoS
This example shows how to configure internal DSCP values 0, 8, 16, 24, 32, 40, 48, and 54 to be mapped
to egress CoS value 0:
Router# configure terminal
Enter configuration commands, one per line.
Router(config)# mls qos map dscp-cos 0 8 16 24 32 40 48 54 to 0
Router(config)# end
Router#
This example shows how to verify the configuration:
Router# show mls qos map | begin Dscp-cos map
Dscp-cos map:
<...Output Truncated...>
Router#
In the Dscp-cos display, the CoS values are shown in the body of the matrix; the first digit of the DSCP
Note
value is in the column labeled d1 and the second digit is in the top row. In the example shown, DSCP
values 41 through 47 all map to CoS 05.
Configuring DSCP Markdown Values
To configure the mapping of DSCP markdown values used by policers (see the
page
Command
Step 1
Router(config)# mls qos map policed-dscp
{normal-burst | max-burst} dscp1 [dscp2 [dscp3
[dscp4 [dscp5 [dscp6 [dscp7 [dscp8]]]]]]] to
markdown_dscp
Router(config)# no mls qos map policed-dscp
{normal-burst | max-burst}
Step 2
Router(config)# end
Step 3
Router# show mls qos maps
When configuring a DSCP markdown map, note the following:
•
•
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
32-68
d1 : d2 0 1 2 3 4
-------------------------------------
0 : 00 00 00 00 00 00 00 00 00 01
1 : 01 01 01 01 01 01 00 02 02 02
2 : 02 02 02 02 00 03 03 03 03 03
3 : 03 03 00 04 04 04 04 04 04 04
4 : 00 05 05 05 05 05 05 05 00 06
5 : 06 06 06 06 00 06 07 07 07 07
6 : 07 07 07 07
32-19), perform this task:
You can enter the normal-burst keyword to configure the markdown map used by the
exceed-action policed-dscp-transmit keywords.
You can enter the max-burst keyword to configure the markdown map used by the violate-action
policed-dscp-transmit keywords.
End with CNTL/Z.
(dscp= d1d2)
5 6 7 8 9
Purpose
Configures a DSCP markdown map.
Reverts to the default map.
Exits configuration mode.
Verifies the configuration.
Chapter 32 Configuring PFC QoS
"Policers" section on
78-14064-04