Example: Setting An Enable Password; Figure 5-15 Change Password Example - Cisco CSS11501S-C-K9 Configuration Manual

General Configuration Examples

Example: Setting an Enable Password

Note
Cisco 11000 Series Secure Content Accelerator Configuration Guide
5-18
The Enable password is requested prior to connecting to the device.
Click Access to activate the Access tabs. The Password page opens
1.
automatically, as shown in Figure 5-15.

Figure 5-15 Change Password Example

2. If an Enable password has already been assigned, type it in the Old Password
text box.
3. Type the password to use in the New Password text box, and retype it in the
Confirm New Password text box.
Click Update to set the password.
4.
To remove an existing Enable password entirely, clear the Enable
checkbox, type the existing password in the Old Password text box.
Click Update.
Chapter 5 Graphical User Interface Reference
78-13124-06