Cisco 7609 Configuration Manual page 392

Cisco ios software configuration guide—12.1e

Hide thumbs Also See for 7609:

Table of Contents

Configuring CDP

Router# show cdp traffic

Router# show debugging

1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet

This example shows how to clear CDP counter configuration:

Router# clear cdp counters

This example shows how to display information about the neighboring equipment:

Router# show cdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E

Displays CDP counters, including the number of packets sent

and received and checksum errors.

Displays information about the types of debugging that are

enabled. Refer to the Debug Command Reference publication

for more information about CDP debug commands.

S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone

Local Intrfce

Configuring CDP

Troubleshooting