Displaying The Nde Configuration - Cisco 7609 Configuration Manual

Chapter 33 Configuring NDE
Clearing an NDE Flow Filter
To clear the NDE flow filter and reset the filter to the default (all flows exported), perform this task:
Command
Router# clear mls nde flow {all | exclude | include}
This example shows how to clear the NDE flow filter so that all flows are exported:
Router# clear mls nde flow all
Router#
To display the status of the NDE flow filters, use the show mls nde command described in the
"Displaying the NDE Configuration" section on page

Displaying the NDE Configuration

To display the NDE configuration, perform this task:
Command
Router# show mls nde
This example shows how to display the NDE configuration:
Router# show mls nde
Netflow Data Export enabled
Netflow Data Export configured for port 0 on Host 0.0.0.0
Source address: 172.20.52.3, port: 8
Version: 0
Include Filter is:
destination: ip address 0.0.0.0, mask 0.0.0.0, port 35
source: ip address 0.0.0.0, mask 0.0.0.0, port 0
Exclude Filter is:
destination: ip address 2.2.2.2, mask 255.255.255.0, port 23
source: ip address 0.0.0.0, mask 0.0.0.0, port 0
Total Netflow Data Export Packets are:
Router#
78-14064-04
0 packets, 0 no packets, 0 records
Purpose
Clears the NDE flow filter.
33-17.
Purpose
Displays the NDE configuration.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
Configuring NDE
33-17