Conventions - Cisco 2811 - Voice Security Bundle Router Hardware Manual

Table 1
Topic
Installing and Upgrading Internal
Modules in Cisco 2800 Series Routers
Removing and Installing CompactFlash
Memory Cards in Cisco 2800 Series
Routers

Conventions

These documents use the conventions listed in
Table 2 Document Conventions
Convention Description
boldface font Commands and keywords.
italic font Variables for which you supply values.
[ ] Optional keywords or arguments appear in square brackets.
{x | y | z} A choice of required keywords appears in braces separated by vertical bars. You must select one.
Examples of information displayed on the screen.
screen font
Examples of information you must enter.
boldface screen
font
< > Nonprinting characters, for example passwords, appear in angle brackets in contexts where italics are
not available.
[ ] Default responses to system prompts appear in square brackets.
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
Note
manual.
Means the described action saves time. You can save time by performing the action described in the
Timesaver
paragraph.
Means the following information will help you solve a problem. The tips information might not be
Tip
troubleshooting or even an action, but could be useful information, similar to a Timesaver.
Means reader be careful. In this situation, you might do something that could result in equipment
Caution
damage or loss of data.
OL-5808-01
Hardware Documentation for Cisco 2800 Series Routers (Continued)
Cisco 2800 Series Hardware Documents: Introduction and Warnings
Description
Describes how to install or upgrade modules that are
located internally within the router, such as memory
modules, AIMs, PVDMs, and power supplies.
Describes hardware installation procedures that do not
require opening the chassis.
Table 2 to convey instructions and information:
Conventions
3