Cisco 2811 - Voice Security Bundle Router Hardware Manual page 122

Installing and Removing Slot Dividers
Installing Slot Dividers in HWIC Slots on Cisco 2801 Routers
Figure 1
Figure 1
1
2
Install slot dividers into HWIC slots on Cisco 2801 routers as follows:
Step 1 Guide the slot divider between the two rails in the bottom of the HWIC slot. Push the slot divider in until
it is fully seated. When the slot divider is fully seated, its outer end is flush with the front panel of the
router. See
Installing Interface Cards in Cisco 2800 Series Routers
2
shows a slot divider for HWIC slots on Cisco 2801 routers.
Slot Divider for HWIC Slots on Cisco 2801 Routers
Figure 2.
OL-5791-01