Cisco 2811 - Voice Security Bundle Router Hardware Manual page 181

Installing the Cover on Cisco 2821 and Cisco 2851 Routers
To install the chassis cover on a Cisco 2821 or a Cisco 2851 router, follow these steps. A number 2
Phillips screw driver is required.
Place the chassis on a flat surface.
Step 1
Step 2 Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
chassis. See
Step 3 Center the cover over the chassis and lower it onto the chassis.
Step 4 Install the three cover screws.
Figure 52
1
OL-5792-04
Figure 52.
Installing Cover on Cisco 2821 and Cisco 2851 Routers
Insert tabs and center the cover 2 Close the cover
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
Installing the Chassis Cover
1
2
53