Table of Contents
Advertisement
Stitch Name
Pattern Presser Foot Pattern No.
Joining stitch
Hand-look
quilting
Quilting
stippling
CAUTION
• Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or
stop button) is accidentally pressed and the
machine starts sewing.
Appliqués
You can create an appliqué by cutting a different
piece of fabric into a shape and using it as a
decoration.
1
Baste the cut design to the fabric.
CAUTION
• If glue is used to hold the cut design in place
on the fabric, do not apply glue to areas that
will be sewn with the machine. If glue is
attached to the needle or race, the machine
may be damaged.
2
Attach zigzag foot "J".
3
Select stitch .
4
Sew along the edge of the fabric with the
needle dropping off the edge at the right.
1 Appliqué fabric
2 Needle drop point
5
Remove the basting, if necessary.
• Make reinforcing straight stitches at the beginning
J
15
J
16
J
17
• Be careful that the needle does not hit a pin
J
45
J
49
Patchwork (crazy quilt) stitching
1
2
(start/
Piecing
Sewing together two pieces of fabric is called
"piecing". The fabric pieces should be cut with a 6.5
mm (1/4 inch) seam allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from
either the right side or the left side of the presser foot.
1
2
3
4
Memo
and the end of stitching.
CAUTION
during sewing, as the needle can break. You
may also be injured.
Fold the edge of the top piece of fabric and
place it over the lower piece.
Sew the two pieces of fabric together so the
pattern spans both pieces.
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
Attach zigzag foot "J".
Select stitch
or
.
Sew with the side of the presser foot aligned
with the edge of the fabric.
• For a seam allowance on the right side
Align the right side of the presser foot with the
edge of the fabric, and sew using stitch
1
UTILITY STITCHES
3
.
1 6.5 mm (1/4 inch)
39
Advertisement
Chapters
Table of Contents
