Hard Drive Blank - HP StorageWorks 600 - Modular Disk System Maintenance And Service Manual

WARNING:
adequately support the chassis during installation and removal. It is not secured to the rack
frame or mounted on rails.
Extend the hard drive drawer.
3.
WARNING:
drive drawers.
CAUTION:
for an extended period of time with the drawer open.

Hard drive blank

CAUTION:
unless all bays are populated with either a component or a blank. Remove a blank only when
there is a drive ready to install or the MDS600 is powered down.
To remove the component:
Extend the hard drive drawer (on page 25).
1.
To reduce the risk of personal injury or damage to the equipment, you must
Pinch hazard—Keep hands out of front and rear of chassis when closing hard
To prevent improper cooling and thermal damage, do not operate the MDS600
To prevent improper cooling and thermal damage, do not operate the MDS600
Removal and replacement procedures 26