Description; Server Board Features - Intel S845WD11U Product Manual

1 Description

Server Board Features

Table 1.

Server Board Features

Feature
Processors
Memory
Chipset
I/O Control
Peripheral Interfaces
Expansion Capabilities
BIOS
Power Management
Form Factor
Description
®
Support for an Intel Pentium
®
Support for an Intel Celeron
400/533 MHz Supported
• Two 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for up to 2 GB ECC system memory
• Support for single-sided or double-sided DIMMs (DDR 200/266)
®
Intel 845E Chipset, consisting of:
• Intel
®
82845E Memory Controller Hub (MCH)
• Intel
®
82801BA I/O Controller Hub (ICH2)
• Intel
®
82802AB 4 Mbit Firmware Hub (FWH)
SMSC LPC47M102 LPC bus I/O controller
• Two external USB ports with an additional internal header providing two
optional USB ports for front panel support
• One serial port and one serial port header
• One parallel port
• Two IDE interfaces with UDMA 33, ATA-66/100 support
• One floppy drive interface with support for two drives (Diskette A and Diskette
B)
• PS/2 †
keyboard and mouse ports
One independent PCI bus (32-bit/33 MHz, 5 V) with three PCI connectors and
four embedded devices:
• 2D/3D graphics controller – ATI Rage
SDRAM
• Two Intel ®
10/100 82550PM Fast Ethernet Controllers
• ATA-100 controller, Promise Technology
Intel/AMI BIOS with support for:
• Advanced Configuration and Power Interface (ACPI)
• Plug and Play
• SMBIOS
Support for ACPI
• Wake on PME
• Wake on Ring (WOR)
• Wake on LAN
†
(WOL)
SSI-compliant
4 processor in a µPGA478 socket
®
processor in a µPGA478 socket
®
†
XL Video Controller with 2 MB of
†
PDC20267
9