Verify Contents - HP D7171A - NetServer - LPr Manual

Chapter 1

Verify Contents

Unpack and verify the contents of the shipping box. If anything is missing or
damaged, contact your reseller.
The conversion kit includes two assembly kits, one for HP racks, and one for
Compaq racks. In addition, it includes the following hardware:
Four lifting handles and their screws
Two rack slides, bar nuts, rack nuts, and their screws and hardware
Control panel bezel
Four AC power cords: two for 100-120 V, and two for 200-240 V
Two HP NetServer LH 3r nameplates
Two HP NetServer LH 4r nameplates
Two HP NetServer LH 3000r nameplates
Two HP NetServer LH 6000r nameplates
®
Pentium II label for HP NetServer LH 3r front bezel
Pentium II Xeon
®
Pentium III Xeon label for HP NetServer LH 3000r or LH 6000r front
bezel
Rack Cabling Reference for the HP NetServer LH 3r
Rack Cabling Reference for the HP NetServer LH 3000r and LH 6000r
HP NetServer LH 4r Rack Cabling Reference
HP NetServer LH 3, LH 4, LH 3000 and LH 6000 Pedestal-to-Rack
Conversion Guide (this guide)
Assembly kit for HP racks
Assembly kit for Compaq racks
6
®
label for HP NetServer LH 4r front bezel
Introduction