HP D7171A - NetServer - LPr Manual page 32

Chapter 3
Bezel Hinge
Figure 3-6. Mounting Hardware for Front Bezel for HP Rack
For the Compaq rack, the bezel mounting hardware is the left and
right recessed brackets, as shown in Figure 3-7. The left recessed
bracket is a long part with four screw holes. The right recessed bracket
is a small metal part with four screw holes, but no latch. Attach this
hardware as described in the HP NetServer LH 3r, LH 4r, LH 3000r,
and LH 6000r Installation Guide for Compaq
28
Conversion: Install Components, Cover, and Front Bezel
®
4000/7000 Racks.
Latch Assembly