Preface; About This Guide - HP D7171A - NetServer - LPr Manual

Pedestal-to-rack conversion guide

Hide thumbs Also See for D7171A - NetServer - LPr:

Table of Contents

Preface

This guide describes how to convert the pedestal configuration HP NetServer

LH 3, LH 4, LH 3000, or LH 6000 to the rack-optimized configuration HP

NetServer LH 3r, LH 4r, LH 3000r, or LH 6000r.

This guide refers to two general types of rack enclosures:

HP Rack: This guide's designation for all of the following rack enclosures:

HP Systems rack enclosure product numbers J1487B and J1488A

HP Rack System/E rack enclosure product numbers J1500A, J1501A,

J1502A

HP Rack System/U rack enclosure product numbers J1464A and

J1466A

Compaq Rack: This guide's designation for the Compaq

enclosures

NOTE

The instructions in this guide are specifically for

Hewlett-Packard rack enclosure product numbers J1464A,

J1466A, J1487B, J1488A, J1500A, J1501A, and J1502A and

the Compaq 4000/7000 rack enclosures.

For information about other rack installations, see the

rack-mount kit instructions that come with your rack or

NetServer, or refer to the following web site:

http://www.hp.com/go/enclosures

4000/7000 rack

Table of Contents