Audience Assumptions; Verify Contents; View The Readme File; Remove The Cover - HP D7171A - NetServer - LPr Installation

Audience Assumptions

This Road Map is for the person who installs, administers, and troubleshoots LAN servers. Hewlett-Packard Company assumes you
are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
1

Verify Contents

Unpack and verify the contents of the shipping box against the Contents Checklist included with your NetServer. If anything is
missing or damaged, call your reseller.
HP NetServer Navigator CD Release History
To ensure that you have the latest versions of the software, obtain the current Release History. This report describes major software
updates to each release of the HP Navigator CD-ROM and instructions for obtaining a current release.
Obtain the Release History in one of these ways:
Fax: Call HP's fax system at 1-800-333-1917(or 1-208-344-4809 from your fax machine). Request the Release History
using the Document Number 6005
Internet WWW:
Internet FTP:
BBS: Call 1-408-553-3500; download 6005.txt from NSNAVCD library
CompuServe:
To obtain drivers and utilities for non-HP components of your system, follow the appropriate Internet, BBS, or CompuServe
procedure specified by the component and network operating system manufacturers.
2

View the Readme File

1. Connect the monitor, keyboard and mouse to the HP NetServer and plug in the power
cord for the HP NetServer and the monitor. Attach the power cord to the power cord
retainer on the back of the HP NetServer.
If you are installing a monochrome monitor, you must change a jumper setting on the
system board. See the
2. If you have a UPS, install and turn on the UPS. Use the supplied serial cable to connect
the UPS to the HP NetServer. Refer to the user's guide included with the UPS for
additional information.
3 Plug in the power cords for the HP NetServer and monitor and turn them both on.
4. Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive and press the
Reset button on the front of the server. The HP NetServer automatically boots from the
HP NetServer Navigator CD-ROM.
If an error message appears, ignore it and press the F1 key. If an error message
appears in Configuration Assistant, press F10 to continue.
5. Go to the HP NetServer Navigator Main Menu. If the language needs to be changed,
select "Set Preferences."
6. Select "Readme File."
install your HP NetServer. Read it carefully before beginning your installation.
7. If you are installing options, you will need to remove the cover. Go to Step 3: "Remove
the Cover."
If you are not installing options, go to Step : "Configure the HP NetServer and Install
Additional ISA Boards."
3

Remove the Cover

If you are installing options, you will need to remove the cover.
Tools you will need:
Flat 1/4-inch screwdriver
Antistatic service kit (3M® 8501/8502/8505 or equivalent). The kit includes a
static-dissipative work surface, chassis clip lead, and wrist strap
WARNING Before removing the cover, always disconnect the power
1. Turn off the NetServer and disconnect the power cord.
2. Unlock the cover using the key in the key bag.
3. Loosen the five mounting screws on the back of the HP NetServer.
4. Slide the cover forward 2 inches (5 cm) and then lift it straight up.
CAUTION Wear a wrist strap and use a static-dissipative work surface
http://www.hp.com/go/netserver
//ftp.netserver.hp.com;logon:anonymous; password: <your e-mail address> cd; NSNAVCD; get 6005.txt
GO HPPC; download 6005.txt from the NetServer library
HP NetServer LH Pro User Guide
The Readme file contains the latest information to help you
8
and T15 TORX® driver
cord and unplug telephone cables. Disconnect telephone
cables to avoid exposure to shock hazard from telephone
ringing voltages. Disconnect the power cord to avoid
exposure to high energy levels that may cause burns when
parts are short-circuited by metal objects such as tools or
jewelry.
connected to the chassis when handling components.
for information.
Power
cord
retainer
UPS
From HP
NetServer
From
Monitor
To serial port of
HP NetServer
Key lock
Key
Bag