Fresenius Medical Care 2008K Operator's Manual page 96

Chapter 4—Monitoring the Treatment
Note: If the access flow rate is less than or equal to the blood pump rate, the access flow rate
will be calculated and reported as approximately the blood pump rate. In this case, the access
flow rate may be lower than indicated.
Note: During the second OLC measurement for the Access Flow test, the UF will change to 70
if running low flux or 300 if running high flux.
OLC Data Screen
Figure 44 – OLC Data Screen
The OLC Data screen provides the actual clearance data of the treatment
Table 19 – The OLC Data Screen Features
Feature
96
Function
The calculated, urea-distribution, fluid volume of the patient.
This is the same volume entered in the Kt/V screen.
This data box displays in hours and minutes the amount of
time the patient has been on dialysis.
2008K Operator's Manual rev. K