Fresenius Medical Care 2008K Operator's Manual page 180

Appendix B
To add a concentrate from pre-programmed catalog:
Touch the Add From Catalog button. A list of the pre-programmed concentrates for the
selected concentrate family will appear. Highlight the desired concentrate by using the data
entry keypad and then pressing CONFIRM.
Touch the Add
From Catalog
button and the
pre-programmed
concentrate list
appears.
Figure 60 – Adding Concentrates from the Catalog
To add a new concentrate that is not in the catalog
Touch the Add New button. Modify all of the constituents to match the concentrate. If a dry
concentrate is being used, set the Granuflo option to Yes. Select the Conc Name button and
then input the desired alphanumeric name. Use the number keys on the front panel for the
numeric values and the letters on the screen for the alphabetic values. Press CONFIRM to
confirm your changes. After all of the constituents are correctly entered and the name of the
concentrate has been chosen, touch the Enter Conc screen button to verify that the
concentrate was entered into the list.
180 2008K Operator's Manual rev. K