Conventions - Fresenius Medical Care 2008K Operator's Manual

Conventions

Symbol
Button
Control
Panel
Key
Screen
Subscreen
Touch
Screen
2008K Operator's Manual rev. K
Description
Warning! A warning is a statement that identifies conditions or actions that
could result in personal injury or loss of life. Warnings found in this
manual outside of this section are designated with the warning symbol.
Shock Hazard: A shock hazard warning refers to a risk of a possibly
severe electrical shock due to improper use or handling of the equipment.
Caution: A caution is a statement that identifies conditions or actions that
could result in damage to the machine.
Note: Notes are advisory comments or recommendations regarding
practices or procedures.
ON: This symbol, at the top of the switches on the back of your machine,
means the switch is in the ON position.
OFF: This symbol, at the bottom of the switches on the back of your
machine, means the switch is in the OFF position.
Degree of protection against electric shock: Type B
Degree of protection against electric shock: Type CF – Blood Pressure
Cuff only
Protective ground terminal
Ground terminal
Equipotentiality
A button refers to pressure-sensitive area located in the treatment screens
that is used to set treatment parameters.
The control panel is located at the top third of the 2008K and contains the
touch screen and panel keys used in controlling the treatment.
A key is a pressure-sensitive, raised pad found on the control panel
outside of the treatment screen that is used to enter a value, make a
selection, or initiate an action or process.
The graphic image displayed inside the touch screen. There are eight
main screens all of which are accessible from any of the other screens.
A smaller screen that can be opened from inside a particular main screen.
Subscreens are not accessible from all main screens.
The area located in the middle of the control console that displays the
treatment screens.
About this manual...
9