Fresenius Medical Care 2008K Operator's Manual page 153

Message Purpose of Message
Lost Battery RAM Data The battery RAM memory has been
lost.
Lower Dia. has been set The operator has attempted to set the
to Min [Max] lower diastolic pressure limit higher or
lower than allowed.
Lower Pulse has been set The operator has attempted to set the
to Min [Max] lower pulse rate limit higher or lower
than allowed.
Lower Sys. has been set The operator has attempted to set the
to Min [Max] lower systolic pressure limit higher or
lower than allowed.
Max UF rate reached. This message informs the operator
Select new Goal or Time that the calculated UF rate is higher
than the internal selection allows.
Max UF time reached This message informs the operator
that the calculated UF time is higher
than the maximum allowed.
153
Type Action Required
Opening Verify all treatment settings before using the machine.
Screen
Message
Dialog The machine has set the limit to the highest or lowest value allowed.
Message Verify that the limit setting is acceptable
Dialog The machine has set the limit to the highest or lowest value allowed.
Message Verify that the limit setting is acceptable
Dialog The machine has set the limit to the highest or lowest value allowed.
Message Verify that the limit setting is acceptable
Dialog In the "Home" screen, decrease the UF Goal or increase the UF
Message Time.
Dialog In the "Home" screen, decrease the UF Time
Message
Troubleshooting 2008K Operator's Manual rev. K