Features Summary; If You Purchased The San Switch 2/8 El - HP StorageWorks 2/8-EL - SAN Switch Release Note

Features Summary

Soft copy of the hp StorageWorks SAN Switch 2/16 Version 3.0.x Installation
Guide, part number AA-RR84B-TE, is also provided on the CD, which is shared
with 2/8 SAN Switch products.
For the latest supported configurations, please refer to the hp StorageWorks SAN
Design Reference Guide, part number AA-RMPNF-TE, available at:
http://h18006.www1.hp.com/storage/saninfrastructure.html
Additional documentation, including white papers and best practices documents,
are available via the HP website at:
http://welcome.hp.com/country/us/eng/prodserv/storage.html
Features Summary
The following sections summarize the management features enabled on your
specific switch model (SAN Switch 2/8 EL or SAN Switch 2/8 Power Pak).

If You Purchased the SAN Switch 2/8 EL

The SAN Switch 2/8 EL ships with the following features enabled:
6
hp StorageWorks Remote Switch Version 3.0.x/4.0.x User Guide, part number
AA-RTS7B-TE
hp StorageWorks QuickLoop Version 3.0.x User Guide, part number
AA-RTS1A-TE
Web Tools—Provides a graphical user interface (GUI) to monitor and manage
the entire fabric.
Zoning—Allows partitioning of the SAN into logical groupings of devices
that access each other.
IV_Domain_Fabric OS—Restricts the number of HP switches within a fabric
to four. To upgrade to full fabric support, you must purchase the Full Fabric
OS license, as listed in the
QuickLoop (present on the switch, but not enabled)—Allows arbitrated loops
to attach to a fabric. To enable, use the Web Tools QuickLoop Tab, or use the
telnet qlPortEnable command.
Optional Upgrades section of these Release Notes.
SAN Switch 2/8 Version 3.0.2k Release Notes