Pre-Migration Requirements On Unix Systems - Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual

20. Verify your configuration and license information on the Server License Summary screen and
21. Click Start on the Apply User Settings screen.
22. Click Next on the Apply User Settings screen.
23. Select the Start Client check box, if necessary, on the Start Server screen and click Finish.
24. Enter your user name and password.
25. Click Login.
26. Click OK on the Login Banner.

Pre-migration requirements on UNIX systems

Before you migrate from EFCM, complete the following:
•
•
•
DCFM Installation, Migration, and Transition Guide
53-1001360-01
click Next.
User Settings migration may take up to 30 minutes.
After all of the DCFM services are started, the Log In dialog box displays.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
To import nicknames from EFCM, refer to
Make sure that a version of EFCM is installed on your server that meets migration
requirements. For information about upgrading to a version of EFCM that meets migration
requirements, refer to the Upgrade Instructions for EFCM 9.6 or 9.7. You may also need to
upgrade E/OS versions on supported switches and directors.
-
If you have EFCM 6.X, 7.0, or 7.1 software, you must upgrade to EFCM 7.2, then upgrade to
EFCM 9.1, then upgrade to EFCM 9.7 before you can migrate to DCFM Enterprise edition.
-
If you have EFCM 8.0 through 8.6.1 software, you must upgrade to EFCM 9.1, then
upgrade to EFCM 9.7, before you can migrate to DCFM Enterprise edition.
-
If you have EFCM 8.7 through 8.9.1 software, you must upgrade to EFCM 9.7, before you
can migrate to DCFM Enterprise edition.
-
If you have EFCM 9.0 through 9.5 software, you must upgrade to EFCM 9.7, before you can
migrate to DCFM Enterprise edition.
Make sure that you fully back up your current EFCM data on your management server.
To do this, copy the \EfcData directory to the Zip disk (notebook server) or CD-RW drive
management server) where backups occur. Overwrite the existing files.
Make sure you fully back up your EFCM data on your current management servers.
Copy the following directories to your configured backup drive, where <Install_Home> is the
directory where the application is installed:
-
<Install_Home>\Client
-
<Install_Home>\Server
-
<Install_Home>\Backup
-
<Install_Home>\Call Home
Pre-migration requirements on UNIX systems
"Importing names" on page 208.
2
203