Installing Professional Plus Edition On Unix Systems (Headless) - Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual

1

Installing Professional Plus edition on UNIX systems (headless)

Installing Professional Plus edition on UNIX systems (headless)
To perform a headless installation through the CLI, complete the following steps.
1. Insert the installation DVD into the DVD ROM drive and open the following file.
2. Read the license agreement, type
3. Type the installation folder path and press Enter, if necessary.
4. Press Enter to accept the default installation path.
5. Review the installation settings and press Enter to continue.
6. Choose from the following after installation is complete:
7.
38
install.exe -i silent -DUSER_INSTALL_DIR="D:\Program Files\DCFM 10.3.0"
The installation starts in CLI mode.
The pre-Installation summary displays.
The application is installed.
•
Type 1 and press Enter to run Configuration immediately.
•
Press Enter to run Configuration later.
A message indicating installation is complete displays.
Press Enter to complete the installation.
and press Enter.
Y
DCFM Installation, Migration, and Transition Guide
53-1001360-01