Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual page 170

Installation, migration, and transition guide
Hide thumbs Also See for StorageWorks 1606 - Extension SAN Switch:
Table of Contents

Advertisement

2
Migrating from Professional Plus edition to Enterprise edition on UNIX systems
8. Choose one of the following options:
9. Click Start on the Data Migration screen.
10. Click Next on the Data Migration screen.
11. Enter the serial number (on the DVD jewel case) and license key (on the Key Certificate) on the
12. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
154
If data is detected on your system, a message displays. Click Yes on the message and click
Next on the Partial Data Migration screen. Go to
If data is not detected, the Copy Data and Settings screen displays. Complete the following
steps.
a. Select Yes, from EFCM, FM, or DCFM installed in this machine or on network and click
Browse to browse to the installation directory.
Click Next on the Copy Data and Settings screen. Continue with
An error message displays if any of the following occur:
Error
Selected location is not valid or not supported.
NOTE
If legacy EFCM or FM software exist in the system, an Uninstall screen displays. Click Yes to
uninstall services of legacy EFCM and FM software.
Data migration may take up to 30 minutes.
Server License screen or browse to the license file (.xml) and click Next.
The License Key field is not case-sensitive.
If data was detected on your system in
If data was not detected on your system in
with
step
12.
The default selection reflects the previous Professional Plus edition configuration.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you select to use an FTP Server which is not configured on the same machine as DCFM, the
Firmware Repository feature will not be available.
step
11.
Fix
Browse to the correct location of the application.
Upgrade to a supported version.
step
8, the Start Server screen displays. Go to
step
8, the FTP Server screen displays. Continue
DCFM Installation, Migration, and Transition Guide
step
9.
step
18.
53-1001360-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm

Table of Contents