Webtools Functionality - Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual

3

WebTools Functionality

WebTools Functionality
Some functionality formerly residing in the WebTools 6.0 application has been moved to DCFM. The
following table details these changes.
TABLE 23
WebTools functionality
Function WebTools 6.0
FCIP Tunnel Port Admin Module > GigE tab
Configuration
GigE Ports Interface Port Admin Module > GigE tab
GigE Ports Route Port Admin Module > GigE tab
Fabric Summary Reports > Fabric Summary
Fabric Events Monitor > Fabric Events
Zoning
Zone database Zone Admin
summary print
Define Device Alias Zone Admin
Remove Offline or Zone Admin
Inaccessible Devices
Device Accessibility Zone Admin
Matrix (Enterprise
edition only)
Analyze Zone Config Zone Admin
(Enterprise edition only)
232
DCFM
Configure > FCIP Tunnel
Configure > FCIP Tunnel
Configure > FCIP Tunnel
Monitor > Reports > Fabric Summary
Report
Monitor > Logs > Events
Configure > Zoning
Zoning report for both online and offline
database.
Configure > Zoning
Configure > Zoning
Replace/Replace all zone members by
selecting the offline devices from the zone
tree. Offline devices have an unknown
overlay badge with good visibility.
Configure > Zoning
The Compare dialog provides the
Storage-Host and Host-Storage view in a
tree representation that is comparable to
the Device Accessibility Matrix when all
devices are selected.
1 Configure > Zoning:
Reverse Find in the Zoning dialog
provides the view of the zoned and
unzoned devices in the fabric if all
zone members are selected for Find.
2 Device Tree and Topology:
Connected End Devices - Custom
Display from the top level in the main
frame provides the device tree and
topology view for all the zoned
devices if all zones are selected in
the active zone configuration.
DCFM Installation, Migration, and Transition Guide
Comments
Viewing FCIP tunnels is still
supported in WebTools 6.1.1, but
New, Edit Config, and delete are
only available in DCFM.
53-1001360-01