Migrating From Professional Edition 10.0.X To Professional Edition 10.3.X On Unix Systems - Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual

Migrating from Professional edition 10.0.X to Professional edition 10.3.X on UNIX systems

Migrating from Professional edition 10.0.X to Professional
edition 10.3.X on UNIX systems
Use the following procedure to migrate from Professional edition 10.0.X software to Professional
edition 10.3.X software on a UNIX management server.
NOTE
Migration of FC port performance statistics is only supported only from DCFM 10.1.4 to 10.3.0. It is
not supported from 10.0.x to 10.3.0 or 10.1.1, 10.1.2, and 10.1.3 to 10.3.0.
1. Insert the installation DVD into the DVD-ROM drive and open the following file.
2. Click Next on the Introduction screen.
3. Read the agreement on the License Agreement screen, select I accept the terms of the
4. Select the usual location for your system's application files (for example, opt/DCFMPro10_3_X)
5. Review the displayed installation summary on the Pre-Installation Summary screen and click
6. Make sure the Launch DCFM Configuration check box is selected (default) on the Installation
7.
8. Choose one of the following options to migrate data from a previous version.
9. Click Next on the Copy Data and Settings screen.
DCFM Installation, Migration, and Transition Guide
53-1001360-01
<DVD_Drive>\DCFMPro\<UNIX_Platform>\install.bin
License Agreement and click Next.
on the Select Install Folder screen and click Next.
Do not install to the root directory (for example, /).
Install.
Complete screen, and click Done.
Click Next on the Welcome screen.
To migrate data from a previous management application, you must do so now.
•
To migrate data from the previous version installed (automatically detected), select Yes,
from DCFM Pro in the following location.
•
To browse to the previous version, select Yes, from DCFM Pro installed in this machine and
click Browse to browse to the installation directory.
An error message displays if any of the following occur:
Error
Selected location is not valid or not supported.
NOTE
If legacy EFCM or FM software exist in the system, an Uninstall screen displays. Click Yes to
uninstall services of legacy EFCM and FM software.
A message displays that reads on successful migration, you will not be able to manage more
than 1000 ports. Do you want to continue? Click OK to continue.
Fix
Browse to the correct location of the application.
Upgrade to a supported version.
2
77