Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual page 217

16. Complete the following steps on the Server IP Configuration screen.
DCFM Installation, Migration, and Transition Guide
53-1001360-01
Current selection reflects the EFCM configuration.
FIGURE 87
Server IP Configuration screen
a. Select an address from the Client - Server IP Configuration Return Address list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
c. Click Next.
If DNS is not configured for your network, do not select the 'hostname' option from either
the Return Address or Preferred Address list. Selecting the 'hostname' option prevents
clients and devices from communicating with the Server.
If you select a specific IP address from the Server IP Configuration screen and the selected
IP address changes, you will not be able to connect to the server. To change the IP
address, refer to "Configuring an explicit server IP address"
Migrating from EFCM 9.6 or 9.7 on Windows systems
on page 60.
2
201