Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual page 246

3
Fabric Manager to DCFM command mapping
TABLE 22
Fabric Manager to DCFM command mapping
Menu Fabric Manager
Fabric Management > Fabric
Merge
Fabric Management > Fabrics
Merge Check
Fabric Management >
Manage Security
Fabric Management > Change
Seed Switch
FC Router Management > FC
Router Configuration
FC Router Management >
Share Devices
FC Router Management >
Diagnose Fabric Device
Sharing
Switch Management > Import
License from File
Switch Management > Load
License from Switch
Switch Management > Add
License Key
Switch Management > Set
Admin Password
Switch Management > Launch
Fabric Watch Configuration
Switch Management > Launch
Switch Admin
Switch Management > Show
FC Port Connectivity View
Switch Management > ACL
Management
Device Management and
Troubleshooting > Import
Device Node / Port Names
Device Management and
Troubleshooting >Device
Connectivity and
Troubleshooting
Device Management and
Troubleshooting > Trace Route
FCIP
SYSLOG Configuration
230
DCFM
<none>
<none>
<none>
Discover > Setup > Change Seed
Switch
Configure > Routing
Configuration
Configure > Zoning
Configure > FC Troubleshooting >
Fabric Device Sharing
<none>
<none>
<none>
<none>
Launch from the switch view,
from right click on switch in
Connectivity Map.
Right click on device in
Connectivity Map or Product Tree
or double click on the device in
Topology
Monitor > Port Connectivity
<none>
<none>
Configure > FC Troubleshooting >
Device Connectivity
Configure > FC Troubleshooting >
Trace Route
Configure > FCIP Tunnel
Monitor > Syslog Configuration
Comments
Not implemented.
Not implemented.
Not implemented.
No change.
No change.
No change.
Not implemented.
Not implemented.
Not implemented.
Not implemented.
Not implemented.
Not implemented.
No change.
No change.
No change.
No change.
DCFM Installation, Migration, and Transition Guide
53-1001360-01