Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual page 89

Migrating from Professional edition 10.0.X to Professional edition 10.3.X on Windows systems
9. Click Next on the Copy Data and Settings screen.
10. Click Start on the Data Migration screen.
11. Click Next on the Data Migration screen.
12. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
DCFM Installation, Migration, and Transition Guide
53-1001360-01
An error message displays if any of the following occur:
Error
Selected location is not valid or not supported.
NOTE
If legacy EFCM or FM software exist in the system, an Uninstall screen displays. Click Yes to
uninstall services of legacy EFCM and FM software.
A message displays that reads on successful migration, you will not be able to manage more
than 1000 ports. Do you want to continue? Click OK to continue.
Data migration may take up to 30 minutes. When data migration is complete, the previous
version is partially uninstalled.
The default selection reflects the previous Professional edition configuration.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you select to use an FTP Server which is not configured on the same machine as DCFM, the
Firmware Repository feature will not be available.
Fix
Browse to the correct location of the application.
Upgrade to a supported version.
2
73