Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual page 56

1
Installing Enterprise trial on Windows systems
6. Make sure the Launch DCFM Configuration check box is selected (default) on the Installation
7.
8. Select No on the Copy Data and Settings screen and then click Next.
9. Click Next on the Server License screen.
10. Select Enterprise on the Trial Editions screen and click Next.
11. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
40
Complete screen, and click Done.
Click Next on the Welcome screen.
To migrate data from a previous management application version, refer to
"Migration".
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you use an FTP Server which is not configured on the same machine as DCFM, the Firmware
Repository feature will not be available.
FIGURE 19
FTP Server screen
Chapter 2,
DCFM Installation, Migration, and Transition Guide
53-1001360-01