Brocade Communications Systems StorageWorks 1606 - Extension SAN Switch Installation Manual page 94

2
Migrating from Professional edition 10.0.X to Professional edition 10.3.X on UNIX systems
10. Click Start on the Data Migration screen.
11. Click Next on the Data Migration screen.
12. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
13. Complete the following steps on the Server IP Configuration screen.
78
Data migration may take up to 30 minutes. When data migration is complete, the previous
version is partially uninstalled.
The default selection reflects the previous Professional edition configuration.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you select to use an FTP Server which is not configured on the same machine as DCFM, the
Firmware Repository feature will not be available.
Current selection reflects the Professional edition configuration.
FIGURE 33
Server IP Configuration screen
a. Select an address from the Client - Server IP Configuration Return Address list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
c. Click Next.
If DNS is not configured for your network, do not select the 'hostname' option from either
the Return Address or Preferred Address list. Selecting the 'hostname' option prevents
clients and devices from communicating with the Server.
If you select a specific IP address from the Server IP Configuration screen and the selected
IP address changes, you will not be able to connect to the server. To change the IP
address, refer to "Configuring an explicit server IP address" on page 60.
DCFM Installation, Migration, and Transition Guide
53-1001360-01