Fibre Address
In fabric environments, the port addresses are assigned automatically. In arbitrated
loop environments, set the port addresses by selecting a unique arbitrated loop
physical address (AL-PA) or loop ID for each port. For specific values, refer to the HP
StorageWorks LUN Configuration and Security Manager XP User Guide applicable
to your array
Fabric and Connection parameter settings
Set each array port to FABRIC ON or OFF with connections of POINT-TO-POINT or FC-AL
as shown in the following figures and table. For detailed topology information, refer to
the HP StorageWorks SAN Design Reference Guide on the
16
Installation
www.hp.com
web site.