Scanning Under The Scan To Ftp Function; Before Using The Ftp Transmission Function; How To Scan Under Scan To Ftp - Kyocera TASKalfa 820 Operation Manual

Performing the Required Operation at the Scanner

Scanning under the Scan to FTP function

The FTP transmission function converts the data of originals scanned on this machine to the PDF or
TIFF format and uploads it directly to an FTP server.
As upload destinations, up to 10 FTP servers can be registered. Uploading to these registered 10
FTP servers can be performed simultaneously.
In environment where an FTP server is operating, installation of software is not required additionally.
Important!
Depending on the network environment or configuration, FTP server that is out of the LAN cannot
be accessible.

Before using the FTP transmission function

For accessing an FTP server, you must consult the server administrator to check the information on
each server and register it to this machine.
•
•
•
•
•

How to scan under Scan to FTP

1 Press the [Scanner] key.
2
Press [Scan to FTP].
3 Select the sender (user). Press directly
the number key, or enter the user
number using the numeric keys and
press [Enter].
30
User name
Password
Host name or IP address of FTP server
Port number (normally 21)
Path (path from the home directory of the FTP server to the folder for storage)
Select scanner function.
Send
Scan to PC
E-mail
Database Scan to
Connection FTP
me.
10/10
Edit
TWAIN
addr. book
History
of sending
Stop
User number
(with #key)
Enter