Registering And Editing User Information - Kyocera TASKalfa 820 Operation Manual

4
Press [System Basic].
Note
If Unable to use scanner appears, the touch panel will return to the System Menu screen. Wait for a
while (approx. 2 minutes) and then press [System Basic] again.
5
Use [] and [] to select the setting
that you want to change and then press
[Change #].
The following explains the procedure for registering the scanner's host name. Refer to this basic
procedure when changing other settings.
6
Press the appropriate keys on the
displayed keyboard in order to enter the
scanner's host name. Check the entered
name and, once you are certain that it is
correct, press [End]. The touch panel will
return to the System Basic screen.
If you press [Stop], the settings will
return to the original settings and the
touch panel will return to the System
Basic screen.
If you press [Close], the touch panel will return to the Scanner setting menu screen.

Registering and editing user information

The following explains the procedure to use the scanner's touch panel to register and edit user
information. Registration of user information is also possible from an Internet Web browser as well
as by using the Address Editor software.
1 Perform steps 1 through 3 under Basic
scanner settings and then press [User
registr.] in the Scanner setting menu
screen.
System Menu / Counter
Scanner setting menu
System Func. Def.
Basic setting.
System Menu
System Menu / Counter
System Basic
Host name.
Host name.
IP address
Subnet Mask
Default Gateway
DHCP/BOOTP
System Menu - Scanner setting menu
Enter host name.
Scanner
System Basic
Shift
m Menu / Counter
menu
Func. Def.
setting.
User
registr.
Setting mode
Scanner
10.181.125.31
255.255.0.0
10.181.125.1
Valid Change #
Limit:32 letters including #
Space
User
registr.
Set-up
Close
7