Kyocera TASKalfa 820 Operation Manual page 27

12
If you select ON under Batch scanning in
the [Edit] tab in the Scan Settings menu
screen, a screen that asks whether or
not you want to continue scanning will
appear after scanning of the original is
complete.
If you DO want to continue scanning, set
the next original, change any scan
settings that you want, and then press
the [Start] key.
Once you have finished scanning originals, press [Scanning finished].
13 If you select On under Continuous
sending in the Scan to PC screen, once
the scanning operation is completed, the
touch panel will return to the Scan to PC
screen, as appropriate, with the current
settings unchanged.
To continue scanning more originals, set
the next original, change any of the
scanning settings as required, and then
press the [Start] key.
Once you have finished scanning originals, press [Cancel].
Note
If Permit file overwrite is selected in the computer's Scanner File Utility when you are using the Scan
to PC function, previous files saved to that computer may be overwritten if a duplicate file name is
use. Be aware of this fact when designating file names for transmission, especially when the
Continuous sending setting is turned ON.
Performing the Required Operation at the Scanner
riginal(s).
iginals and press start key .
ning finished ] key to finish scanning .
Step 2
Top Edge Top
Original
Orient.
300 dpi
Scan
Resolution
Quality Edit
Ready to scan.
Place the original and select destination .
Scan to PC-Continuous TX
Destination
Group A
Group B
User A
Save at
Address
User PC Book
10/10/`10 10:10
Cancel
Original 1 Page
SCAN0060 _000.tif
Scanning
finished
Single Scan
Auto Top Edge Top
Original Original
Size Orient.
Auto size 300dpi
Delete Sending Scan
Size Resolution
Basic Quality
Original
A4
10/1
19