Kyocera TASKalfa 820 Operation Manual page 31

14
If you select On under Batch scanning in
the [Edit] tab in the Scan Settings menu
screen, a screen that asks whether or
not you want to continue scanning will
appear after scanning of the original is
complete.
If you DO want to continue scanning, set
the next original, change any scan
settings that you want, and then press
the [Start] key.
Once you have finished scanning originals, press [Scanning finished].
15 If you select On under Continuous
sending in the Send E-mail screen, once
the scanning operation is completed, the
touch panel will return to the Send
E-mail screen, as appropriate, with the
current settings unchanged.
To continue scanning more originals, set
the next original, change any of the
scanning settings as required, and then
press the [Start] key.
Once you have finished scanning originals, press [Cancel].
Performing the Required Operation at the Scanner
ginal(s).
ginals and press start key .
ng finished " key to finish scanning .
tep 2
Top Edge Top
Original
Orient.
300 dpi
Scan
Resolution
Quality Edit
Ready to scan.
Place the original and select destination .
Send E-mail-Continuous TX
Destination
To: Group A
CC: Group B
BCC: User A
Enter Address
dest. Book
08/25/`04 18:31
Cancel
Original 1 Page
SCAN0060 _000.tif
Scanning
finished
Single Scan
Auto Top Edge Top
Original Original
Size Orient
Orig.Size 300dpi
Delete Sending Scan
Size Resolution
Basic Quality
Original
A4
10/1
23