Kyocera TASKalfa 820 Operation Manual page 30

Scan system (h) operation guide (setup edition)
Hide thumbs Also See for TASKalfa 820:
Table of Contents

Advertisement

Performing the Required Operation at the Scanner
9
Once you have selected all of the
destinations that you want to send the
e-mail to, press [Close].
10
Check the selected destinations. Use
[] and [] to make sure that all of the
selected destinations are correct. If an
incorrect or unnecessary destination is
in the list, select it and press [Delete].
Scan settings
11
The Scan Settings menu is displayed in
the right portion of the touch panel. If
you want to change any settings, press
the key that corresponds to that setting.
The following gives an example of the
procedure to specify the orientation of
the original.
Press [Orig. Set Direction].
12
If you set the original with its top edge
towards the rear of the scanner, select
Top Edge. If you set the original with its
top edge towards the left of the scanner,
select Left Top. Press [Close] to register
the change to that setting or [Back] if you
want to cancel the operation and return
to the previous setting. The screen will
return to that shown in step 11.
Note
If the setting for the orientation of the original is not appropriate to the actual orientation, scanning
may be accomplished incorrectly. Be sure to confirm the orientation of the original when making
scan settings.
13
Once you have checked all of the
settings, set the original and press the
[Start] key.
Scanning of the original will begin.
If you want to stop the scanning
operation, press [Cancel].
22
Ready to scan.
Place the original and select destination .
Send E-mail-Continuous TX
Destination
To:
Group A
CC:
Group B
BCC:
User A
Enter
Address
dest.
Book
Ready to scan.
Place the original and select destination .
Send E-mail-Continuous TX
Destination
To:
Group A
CC:
Group B
BCC:
User A
Enter
Address
dest.
Book
to scan.
iginal and select destination .
ntinuous TX
Original
p A
Size
p B
A
Delete
Sending
Size
Address
Book
scan.
al and select destination .
"Check direction of original " shown at
right side of display . Follow the steps .
If setting mode is wrong , incorrect copy
will result .
Now scanning originals .
Orig._Set_Direction
Orig. Page
A4
1 sided
Top Edge
User name: User A
Single Scan
Auto
Top Edge Top
Original
Original
Size
Orient
Orig.Size
300dpi
Delete
Sending
Scan
Size
Resolution
Basic
Quality
Single Scan
Auto
Top Edge Top
Original
Original
Size
Orient
Orig.Size
300dpi
Delete
Sending
Scan
Size
Resolution
Basic
Quality
Original
Send
A4
10/10/`08 10:10
Single Scan
Cancel
Auto
Rear
Auto
Original
File Name
Orient
Entry
Auto size
300dpi
PDF
Scan
File
Resolution
Format
Basic
Quality
Edit
Original
Send
A4
10/10/`08 10:10
Back
Close
Select Original
Orientation .
Top Edge
Top Edge
Top
Left
Send
Send E -mail
A4
SCAN006_0000.tif
Original
A4
10/1
Original
A4
10/1
A4
A4
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 620Scan system (h)

Table of Contents