Printing A Quick Copy Job; Reprinting A Quick Copy Job - Kyocera TASKalfa 820 User Manual

Job

Printing a Quick Copy Job

1
2
3
4

Reprinting a Quick Copy Job

1
2
3
4
5
6
7
9-5
and print the job from the printing system's operation panel without sending the
job again from the computer.
The number of Quick copy or Proof and hold jobs that can be stored is set at
the printing system's operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Quick copy jobs are stored on the hard disk after printing but are deleted when
the printing system is turned off. You can manually delete a job at the operation
panel.
Warning: A print job can replace a job on the hard disk having the same User
name and Job name. To prevent this, select Use job name + date and time
under Overwrite job name.
With a hard disk installed, Quick copy lets you print a document and save it in
the printing system until the job is manually deleted or the printing system is
turned off.
From the application's File menu, click Print, then click Preferences or
Properties to open the Properties dialog box.
In the Job tab, select Job storage (e-MPS).
Select Quick copy.
Click OK in all dialog boxes.
For example, use Quick copy when you print copies for a meeting later in the
day. If you learn at the last minute that additional copies are needed, you can
print them quickly using the printing system's operation panel without sending
the job again from your computer.
You can reprint a Quick copy job from the printing system's operation panel
without sending the job again from your computer.
At the printing system's operation panel, press the Printer key.
On the screen, touch e-MPS.
Touch Quick Copy.
Touch the up and down arrows to select the User name, then touch Next.
Touch the up and down arrows to select the Job name, then touch Next.
Touch plus or minus to select the number of copies.
Touch Printing to print the job.
User Guide