Identification; Units; Language Preference; Pdl (Page Description Language) - Kyocera TASKalfa 820 User Manual

Identification

Setting User Identification
1
2

Units

Selecting a Unit of Measurement
1
2

Language Preference

Setting Language Preference
1
2

PDL (Page Description Language)

KX Driver
Identification lets you identify your print job with a User name and
Department name, up to 31 characters. The User name can be used to identify
a print job stored on the hard disk.
You can type User name and Department information to be used with the Job
Storage (e-MPS) feature.
In Device Settings > User, type your preferred name in the User name text
box.
Type your department or group name in Department text box.
You can type up to 31 characters in the User name and Department text
boxes.
You can set Inches or Millimeters as the unit of measurement. This is used for
the following settings:
• Custom page size setting in the Page Sizes dialog box in the Basic tab.
• Spacing setting in the Watermark Add and Edit dialog boxes in the
Advanced tab.
• Poster settings and Gutter settings in the Layout tab.
You can select a unit for displaying measurements in the user interface.
In the Device Settings tab, click User.
Select Inches or Millimeters.
The Language preference option specifies the user interface language of the
Device Settings tab of Printer Properties and all tabs of Printing
Preferences. Available languages vary depending on your locale and your
computer settings.
You can select a user interface language.
In Device Settings > User, select the desired language from the Select
language list.
Click OK in the User Settings and Properties dialog boxes.
A Page Description Language (PDL) specifies the contents and layout of a
printed page. In the Device Settings tab, you can choose from PCL XL,
(Printer Command Language XL), PCL 5e, KPDL (an emulation of PostScript
Device Settings
2-9