Printing Additional Copies Of Quick Copy Jobs; Deleting Quick Copy Jobs - Kyocera FS-720 User Manual

Printing Additional Copies of Quick Copy Jobs

The actual key operation may differ depending on the model.
1.
Press the MENU key on the printer operator panel.
2.
Press the or key repeatedly until e-MPS > appears.
3.
Press the key to access the submenu.
4.
Press the or key repeatedly until >Quick Copy appears.
5.
Press the ENTER key. A blinking question mark [ ? ] displays by the user name.
6.
If the user name is correct, press the ENTER key. Otherwise, press the
the correct name appears.
7.
Press the ENTER key. Follow the instructions in the
continue.
8.
The job name appears with a blinking question mark [ ? ].
If this is the correct job for printing, press the ENTER key.
Otherwise, press the
ENTER key.
9.
Press the or key to specify the number of copies.
10.
Press the ENTER key. The Quick Copy job initially printed is printed in the specified
number of copies.

Deleting Quick Copy Jobs

1.
Refer to steps 1 through 8 in
108.
2.
If this is the correct job for deletion, press the ENTER key.
Otherwise, press the
3.
After the menu for specifying the number of print copies appears, press the
Delete appears.
4.
Press the ENTER key to delete the job.
or key until the correct name appears. Then, press the
Printing Additional Copies of Quick Copy Jobs
or key until the correct name appears.
108
or
Identification on page 22 to
key until
on page
key once.