Collation; Duplex Printing; Multiple Pages Per Sheet - Kyocera TASKalfa 820 User Manual

Collation

Duplex Printing

KX Driver
EcoPrint
This icon allows for black and white printing with EcoPrint, or without it. Click
the EcoPrint icon to make text and graphics appear lighter in the printed job.
EcoPrint does not increase print speed.
Collate
This icon changes the ordering of the printed pages. The page ordering
sequence can either be 123, 123, 123, or 111, 222, 333, and so on. You can
also Reverse the order of the printed pages by selecting this option.
(Reverse is available when Printer default is not selected under
Destination in the Basic tab. Reverse can be disabled in Device Settings
> Compatibility Settings.)
Print on both sides
This icon changes between duplex printing for flipping on the long edge,
duplex printing for flipping on the short edge, or for not using duplex printing.

Multiple pages per sheet

This icon changes between Off, 2, and 4 and for the number of sheets
printed on one page. For more than 4 sheets per page, define these settings
in Layout > Multiple pages per sheet.
Any basic print options can be Reset to the default values in the Quick Print
tab. This button only appears when it is accessed from an application's Print
dialog box.
The following sections describe some of the Quick Print tab options in more
detail. Collate, Duplex printing, and EcoPrint can also be found in the Basic
and Imaging tabs, and Multiple pages per sheet in the Layout tab. The
Profiles options are accessed from Printing Preferences.
Collate increases print speed to specify the order in which the pages of a
multi-copy job are printed. With Collate selected, the print job's data is rendered
as page images in the printing system's memory after it has been downloaded
the first time. The remaining job copies are printed from this stored data,
bypassing the process of sending down the job's data from the computer to the
printing system with every copy.
With Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with Collate selected, three
copies of a five-page document outputs as pages one through five in
succession, three times. The driver graphics image displays the grouping of
collating and non-collating pages.
Duplex printing is printing on both sides of each page. Select Print on both
sides to enable duplex printing. If it is not selected, then the printer prints on
only one side of each page. Selecting duplex mode directs the printing system
to print on both sides of a page. The printer system contains a duplex unit that
turns the paper over to allow printing on the reverse side. Print on both sides
must be enabled to print on both sides of the cover and insert pages.
Flip on long edge
Turn the long edge of the page to view the content.
Flip on short edge
Turn the short edge of the page to view the content.
Quick Print
3-2