Upgrading Driver Components; Express Installation; Installing On Windows Vista And Windows Xp - Kyocera TASKalfa 820 User Manual

Installation

Upgrading Driver Components

1
2
3

Express Installation

Installing on Windows Vista and Windows XP

1
2
3
1-2
The installation differs based on your operating system and connection method.
Select your operating system and connection method from the following list and
proceed to the reference page to continue the installation.
Express Installation
Installing on Windows Vista and Windows XP
Custom Installation
Installing on Windows Vista and Windows XP with a USB Connection
1-4
Installing on Windows Vista and Windows XP with a Network Connection
page 1-5
Note: KPrint installs a client port monitor that lets Windows TCP/IP print from
any network card connected to Kyocera printing systems. KPrint supports LPR
and IPP printing. For the KPrint Installation instructions, refer to your Product
Library CD. KPrint uses a stand-alone installer.
If the installation wizard detects newer driver components, the Welcome page
appears. If older driver components are detected, the Welcome page is
bypassed, and the Software Component Upgrade page appears.
Choose the component to upgrade. Click Next.
Confirm your upgrade settings. To start the upgrade, click Upgrade.
When the upgrade completes, click Next. The Installer— Installation Method
page appears.
Express mode applies to driver installation for a USB or network connection
only. The installation wizard discovers Kyocera printers that are turned on, and
connected by USB and network cable. In Custom Mode, you are able to select
the installation packages and specify the port.
This section describes the quick installation procedure of the driver software on
Windows Vista and Windows XP.
Ensure that your printer and computer are turned on and connected by USB, or
network cable.
On the Installation Method page, click Express Mode, and click Next.
The Discover Printing System page opens to search for your printer. If
Discover does not find your printing system, a message appears. Remove and
reinsert the USB or network cable, and ensure it is connected properly. Click
Refresh to retry the discovery. If the system still cannot find your printer, contact
your system administrator.
If Discovery finds your printer, click the printer name to select it.
on page 1-2
on page
on
User Guide