Printing Preferences - Kyocera FS C5030N - Color LED Printer Driver Manual

Printing Preferences

Tab: Paper/Quality (Colour printers only)
Advanced...
Window:
Paper/Quality
If you switch the print driver from Monochrome to
Colour, there is a chance that the printer still
prints b/w instead of colour.
In this case click the button 'Advanced...' and do
the settings shown below.
Move to 'Color Printing Mode:'
(Farbdruckmodus:) and switch the setting to
'True Color (24bpp)'.
To confirm the setting click 'OK'.
Graphics Mode: (PCL 5 driver only)
If you have problems getting a correct print-out of
a specific document try to use another setting of
'Graphics Mode:' (Grafikmodus:). There are two
choices, 'HP-GL/2' or 'Raster'.
In most cases switching the graphics mode will
help.
Page 4 - 11