Snmp Settings - Kyocera TASKalfa 820 User Manual

Setting the Administrator Password
1
2
Clearing the Administrator Password
1
2
3
4

SNMP Settings

SNMPv3 Options
KX Driver
selected, this setting will prompt you to enter a password and confirm the
password. This password protection blocks access to Job accounting,
Operation panel message, Show Quick Print tab, Lock Security Settings,
and SNMP Settings. You must also set the administrator password in the
printing system's Command Center.
In Device Settings > Administrator Settings, select Password protect
administrator settings.
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
In the Device Settings tab, click Administrator.
In the Enter Password dialog box, type the password and click OK.
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box.
Click OK.
Simple Network Management Protocol (SNMP) is a set of rules that govern the
management of network devices, such as printing systems. SNMP settings
determine the level of security when using the Auto Configure feature, and
prevent unauthorized printing to the SNMPv3 printing system. SNMP settings
must be set in the printer driver and in the printing system's Command Center.
The following SNMP options are available:
SNMPv1/v2c
This option ensures successful Auto Configure communication using Read
community name and Write community name.
SNMPv3
This option ensures secure Auto Configure communication using a user
name and password. Authentication and privacy options are available by
selecting Settings.
Apply to other models
This option displays a list of installed printing systems to apply the selected
SNMP settings.
You can select SNMPv3 options for secure communication with the printing
system.
SNMPv3 is enabled when an optional IB-23 network card is installed. These
settings must match the IB-23 settings. IB-23 has settings for both an
authentication password and an encryption password, but they must both match
the driver password.
Authentication
Device Settings
2-7