Desktop Management; Initial Configuration And Deployment - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading Option
Slot Options
* Available on select models.
** These options should be used by advanced users only.

Desktop management

HP Client Management Solutions (available for download from http://www.hp.com/go/easydeploy)
provides standards-based solutions for managing and controlling workstations in a networked
environment. This section summarizes the capabilities and features of desktop management key
components:
●
Initial configuration and deployment on page 31
●
Remote system installation on page 32
●
Managing and updating software on page 32
● ROM flash on page 34
●
Asset tracking and security on page 38
●
Fault notification and recovery on page 44
NOTE: Support for specific features described in this guide might vary by model or software version.

Initial configuration and deployment

The workstation comes with a preinstalled system software image. After a brief software unbundling
process, the workstation is ready to use.
ENWW
Description
Enables you to allow peer-to-peer memory reads between the PCI-X buses behind the PXH-V.
Fast Delayed Transaction Timer
Enables you to set Discard Transaction Timer to "short delay." This may improve performance
issues with certain PCI devices. Do not enable this setting unless instructed to do so by the PCI
device supplier.
Applies to these slot types:
●
Slot 1 — PCI
●
Slot 2 — PCI Express x16
●
Slot 3 — PCI Express x8 (x4)
● Slot 4 — PCI Express x16 (x4)
● Slot 5 — PCI-X 133
●
Slot 6 — PCI-X 100
●
Slot 7 — PCI-X 100
For PCI Express slots, the available option is Option ROM Download.
For PCI-X slots, the available options are Speed, Option ROM Download, and Latency Timer.
For PCI slots, the available options are Option ROM Download and Latency Timer.
Desktop management 31